The GRAS 67SB Blast Probe is designed as a reference microphone for impulse measurements according to the ANSI/ASA S12.42 standard.
Technology
The 67SB Blast Probe is designed as a reference microphone for impulse measurements according to the ANSI S12.42 standard. The 67SB can measure impulse signals with an A-duration of 0.5 ms ≤ impulse ≤ 2.0 ms, and it has a working range of 10 Hz – 20 kHz. The 1/8” reference microphone inside the 67SB is ideally suited for capturing impulsive signals with a very fine time resolution. This microphone has an upper limit of 174 dB in the dynamic range.
The 67SB is equipped with a 1/8" reference microphone which is designed to capture impulsive noise with a very short duration. The 67SB is provided with a 1/4" threaded hole for monting the 67SB directly on a tripod e.g. AL0006.
The design and concept of the 67SB, and the microphone and preamplifier, comply with the following standards:
• ANSI S12.42 – “Methods for the Measurement of Insertion Loss of Hearing Protection Devices in Continuous or Impulsive Noise Using Microphone-in-Real Ear or Acoustic Test Fixture Procedures”
• IEC Standard 61094-1 – “Specifications for Laboratory Standard Microphones”
The 67SB has a length of 410 mm.
Specifications
| Polarization/Connection |
|
200 V / Traditional |
| Frequency range (±2 dB) |
Hz |
10 to 20 k |
| Dynamic range lower limit with GRAS preamplifier |
dB(A) |
52 |
| Dynamic range upper limit |
dB |
174 |
| Microphone venting |
|
Rear |
| Output impedance |
Ω |
75 |
| Temperature range, operation |
°C / °F |
-30 to 70 / -22 to 158 |
| Temperature range, storage |
°C / °F |
-40 to 85 / -40 to 185 |
| Static pressure coefficient @250 Hz |
dB/kPa |
-0.01 at 25 °C |
| Humidity range non-condensing |
% RH |
0 to 95 |
| Humidity coefficient @250 Hz |
dB/% RH |
<0.1 / 0–100 |
| Influence of axial vibration @1 m/s² |
dB re 20 µPa |
59 |
| Connector type |
|
7-pin LEMO (FGG.1B.307) |
| CE/RoHS compliant/WEEE registered |
|
Yes/Yes/Yes |
| Weight |
g / oz |
650 / 22.9 |